D810
Model:D810
ORCATORCH D810 is a dive light with high output, high reliability, and high portbility. It can reach as high as 950 lumens output with one simple CREE XM-L2(U2) LED. The head mechanically rotary switch offers high reliability underwater. The light is light weight and small size powered by one 26650 battery.
• Cree XM-L2(U2) LED
• Uses one 26650 battery
• Toughened glass with two-side coating
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• Mechanically head rotary switch offers high reliability underwater
• Water pressure resistant construction, depth rated to 150 meters
• High efficiency constant current circuit, constant brightness
• Reverse polarity protection, to protect from improper battery installation
• Premium Type III military hard-anodized seawater-corrosion-resistance finish, etc.
• VIDEO: http://www.orcatorch.com/uploadfiles/images/30/3027bd1efc-d810.mp4
• Uses one 26650 battery
• Toughened glass with two-side coating
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• Mechanically head rotary switch offers high reliability underwater
• Water pressure resistant construction, depth rated to 150 meters
• High efficiency constant current circuit, constant brightness
• Reverse polarity protection, to protect from improper battery installation
• Premium Type III military hard-anodized seawater-corrosion-resistance finish, etc.
• VIDEO: http://www.orcatorch.com/uploadfiles/images/30/3027bd1efc-d810.mp4
1. Avoid diving lights/flashlights from heavy objects or heavy drops.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.