D580
ORCATORCH D580 is a professional underwater dive light with max 530 lumens output. Mechanically head rotary switch offers high reliability underwater. The light is compatible with two types of batties: 1* 18650Li-ion rechargeable battery, which is economic and eco-friendly, and the 3*AAA Alkaline batteries, which is low cost and easy to get. It has 6 degrees super narrow beam, quite suitable for recreational diving as a primary light, and for technical diving as a backup light.
• Uses CREE LED, max 530 lumens
• Uses 3*AAA battery, compatible with 1*18650 battery
• 6° beam angle
• Mechanically head rotary switch offers high-reliability underwater
• Intelligent Over-Heat protection
• Water pressure resistant construction, depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• The latest diamond grade hard-anodized seawater-corrosion-resistance finish
• Two sides coated toughened glass with high water pressure resistance under deep water
• Video : https://www.orcatorch.com/uploadfiles/images/f2/f234a1de59-d580-360p.mp4
• Uses 3*AAA battery, compatible with 1*18650 battery
• 6° beam angle
• Mechanically head rotary switch offers high-reliability underwater
• Intelligent Over-Heat protection
• Water pressure resistant construction, depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• The latest diamond grade hard-anodized seawater-corrosion-resistance finish
• Two sides coated toughened glass with high water pressure resistance under deep water
• Video : https://www.orcatorch.com/uploadfiles/images/f2/f234a1de59-d580-360p.mp4
1. Avoid diving lights/flashlights from heavy objects or heavy drops.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.