-
7601 First Stage
• Piston design
• One high pressure and three low pressure ports
8515 SK100 Second Stage
• Second stage with a 27” black hose
• Balanced design
30-degree inline swivel
• Adjustable inhalation effort with knob
• Adjustable Pre-dive/Dive switch
• Weight (without hose): 189g
• Dimensions (front profile): 6.8 cm (approx.2.67”)
• Factory set inhalation effort: 1.1 CIW -
• Octopus with a 36” yellow hose
• Comfortable mouthpiece and light weight design reduces overall jaw fatigue during the dive
• Pre-positioned front cover ring holes which ensure ease of serviceability after heavy use
• The downstream demand valve design gives you a device with high airflow and seamless breathing
• Specially engineered purge shapes and vents prevent diaphragm surge in currents
• Ideal choice for the most rugged of diving conditions
• Bright yellow cover ensures its high visibility for any emergency situation
• Weight (without hose): 155g
• Dimensions (front profile): 6.8 cm (approx. 2.67”)
• Factory set inhalation effort: 1.2 – 1.4 CIW -
• 400 bar pressure gauge
• Sturdy and reliable
• Easy readability
• Easily attachable modules
• Braided HP hose -
The 9000 Cyclone is made out of 1000 Denier Cordura Nylon with PU Coating. Its adjustable and releasable shoulder straps, which are free standing, simplify don and doff operations and contain no air. These shoulder straps and the comfortable adjustment cummerbund contribute to an enjoyable and mesmerizing dive.
• Single tank belt
• Standard buoyancy
• Hose clamp and inflator included
• Lift capacities (size / kg of lift): XS/12.0, S/14.0, M/17.0, L/22.0, XL/27.0
REGULATOR-
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
BCD-
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
CONSOLE-
Avoid placing it with magnetic objects to avoid affecting accuracy.
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
BCD-
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
CONSOLE-
Avoid placing it with magnetic objects to avoid affecting accuracy.
