IN DIVING

QLR4 WEIGHT POCKET, VOLUNTARY RECALL

2023-05-10
Recall Summary



Title: QLR4 Weight Pocket, Voluntary Recall



Product/Part Numbers affected:





Description:

There have been incidents reported of QLR4 weight pockets failing during normal operation, which could pose a drowning hazard to users. We recommend taking all necessary precautions and discontinuing use of the affected products immediately.    



Affected Products:

To determine if the BCD you purchased is affected by this voluntary recall, any Oceanpro, Excursion, or Hera BCD with serial numbers within 608262-695909, 1170357-1180342, 1200001-1200070, 20031001-22082698, and have a QLR handle that DOES NOT contain a date code (see Identifying Marks section) on the underside needs to stop use immediately. Furthermore, if you have purchased QLR4 weight pockets since 07/2019 that do not have a date code, they are also affected by this recall and should be replaced as soon as possible.



Identifying Marks:

The following photos and descriptions are for identification of the BCD’s affected. Remember to check both the BCD serial number range, and date code on the weight pocket. The BCD must have both criteria to be affected by the recall.



    1. The serial number can be found on the product warning label located on cummerbund.



    QLR identifier 1



    2. Date code on the pockets can be located on the underside of the handle, as shown in the image below:



    QLR identifier 2



Please note: Part number, description and serial number are located on the outside of the packaging barcode label:



    QLR identifier 3

    (Note: If packaging is missing, BCD can be identified by the model name shown on the product.) 





Remedy:

If you have in your possession a BCD bearing a serial number shown on the list with QLR4 weight pockets without the date code shown, or QLR4 weight pockets purchased separately that are affected, please email our service team at service@huishoutdoors.com. We will need your full name, phone number, shipping address, and the BC serial number(s) affected. We will then ship you the replacement QLR4 weight pockets for use free of charge. Once the QLR4 pockets are replaced, the BCD can continue to be used and defective pockets should be disposed of.