• 20 lbs (9 kg) of integrated weight in the Pinch & Release system and 10 lbs (4.5 kg) trim
• Padded backplate features an extended lumbar support to transfer tank weight onto hips, relieving shoulder stress
• Three (3) over pressure relief valves optimize buoyancy control
• Crucial areas constructed of 1000D denier Cordura fabric
• 2 large, zippered pockets with knife mounting grommets
• Adjustable depth-compensating cummerbunde
• Lift capacity : SM 30 lb (130 N); MD 35 lb (155 N); LG 45 lb (200 N); XL 55 lb (240 N)
• Padded backplate features an extended lumbar support to transfer tank weight onto hips, relieving shoulder stress
• Three (3) over pressure relief valves optimize buoyancy control
• Crucial areas constructed of 1000D denier Cordura fabric
• 2 large, zippered pockets with knife mounting grommets
• Adjustable depth-compensating cummerbunde
• Lift capacity : SM 30 lb (130 N); MD 35 lb (155 N); LG 45 lb (200 N); XL 55 lb (240 N)
.jpg)
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
