SMS 75
Model：208.1375.003
Hollis has become a leader in the sidemount market. It is not just a fad and not just a tool for cavers, it’s here to stay and is growing. The SMS 75 is an evolution from years of sidemount development, which started with the SMS 100. A product that has been copied, modified and a benchmark for technical sidemount for years. Even more popular has been the lightweight SMS 50 line. These two have taken sidemount mainstream and the building blocks this new harness. While it will cater more to hardcore cave divers, SMS 75 was created to handle all environments. Proper trim is key and the wing is designed to promote horizontal diving with increased lift towards the hips where it’s needed most, and without modification. The SMS 75 will also support rear mounted tanks and reversible inflator positions.
• Trapezoid shape to promote horizontal trim
• Adjustable and removable wing bungee
• Designed for cave or open water sidemount
• Cam slots for single tank and grommets at 11” for banded doubles
• Reversible Inflator & Dump assembly
• Rigging kit included: Tank bungees, SS Cam bands, SS Bolt snaps & nylon line
• Includes sternum strap & crotch strap
• Inner located elbow to avoid overhead interference
• Adjustable and removable wing bungee
• Designed for cave or open water sidemount
• Cam slots for single tank and grommets at 11” for banded doubles
• Reversible Inflator & Dump assembly
• Rigging kit included: Tank bungees, SS Cam bands, SS Bolt snaps & nylon line
• Includes sternum strap & crotch strap
• Inner located elbow to avoid overhead interference
• Rugged 1000D Cordura
• 40 lbs. / 18 kgs. lift
• Three sizes: SM/MD, LG/XL and XXL
• System weight 7 pounds
• 40 lbs. / 18 kgs. lift
• Three sizes: SM/MD, LG/XL and XXL
• System weight 7 pounds
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
