D611
Model：D611
ORCATORCH D611 is a primary canister dive light specially designed for underwater adventure such as scuba diving and cave diving. The light head is connected by a cable to the battery canister containing two 26650 batteries, this allows you to fix the battery canister to your body so you just need to hold the small light head when using it.
• Cree XHP70 LED, 2400 lumens output
• Uses two 26650 batteries
• Battery canister is separated from the light , easier to carry
• Totally sealed magnetic switch offers high waterproofness and easy operation underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material, etc.
• VIDEO: http://www.orcatorch.com/uploadfiles/images/6c/6c091e5ad7-d611.mp4
• Uses two 26650 batteries
• Battery canister is separated from the light , easier to carry
• Totally sealed magnetic switch offers high waterproofness and easy operation underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material, etc.
• VIDEO: http://www.orcatorch.com/uploadfiles/images/6c/6c091e5ad7-d611.mp4
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
1. Avoid diving lights/flashlights from heavy objects or heavy drops.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
