D800
Model：D800
OrcaTorch D800 is a portable dive light with a mechanically tail rotary switch for technical diving use. ically tail rotary switch for technical diving use. The mechanically rotary switch offers high reliablility underwater. Utilize three USA CREE LEDs, it can reach an amazing 2100 lumens output. And its runtime is nearly 3 hours 20min by using two 26650 batteries.
• 3*Cree LED,2100 lumens output
• Uses 2*26650 batteries
• Aircraft-grade high strength aluminum material
• Over-discharge protection function
• Mechanically tail rotary switch offers high reliability underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Alloy aluminum reflector with professional optical analysis
• Premium Type III military hard-anodized seawater-corrosion-resistance finish
• Toughened glass with high water pressure resistance under deep water
• VIDEO: http://www.orcatorch.com/uploadfiles/images/60/605ec44753-d800.mp4
• Uses 2*26650 batteries
• Aircraft-grade high strength aluminum material
• Over-discharge protection function
• Mechanically tail rotary switch offers high reliability underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Alloy aluminum reflector with professional optical analysis
• Premium Type III military hard-anodized seawater-corrosion-resistance finish
• Toughened glass with high water pressure resistance under deep water
• VIDEO: http://www.orcatorch.com/uploadfiles/images/60/605ec44753-d800.mp4
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
1. Avoid diving lights/flashlights from heavy objects or heavy drops.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
