D520
Model:D520
OrcaTorch D520 is a palm-sized diving light with a mechanically rotary switch. The rotary switch offers high reliability underwater. Using the USA CREE XM-L2(U4) neutral white LED, its max output can reach 1000 lumens, meanwhile the 5000K LED color temperature provides superb color rendition. Powered by one 18650 battery, its max runtime can reach 2 hours.
• Cree XM-L2(U4) LED, max 1000 lumens output
• Uses 1*18650/2*CR123A/2*16340 battery
• Mechanically head rotary switch offers high reliability underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• The latest diamond grade hard-anodized seawater-corrosion-resistance finish
• Alloy aluminum reflector with professional optical analysis
• Uses 1*18650/2*CR123A/2*16340 battery
• Mechanically head rotary switch offers high reliability underwater
• Water pressure resistant construction ,depth rated to 150 meters
• Reverse polarity protection, to protect from improper battery installation
• Over-discharge protection function
• Aircraft-grade high strength aluminum material
• The latest diamond grade hard-anodized seawater-corrosion-resistance finish
• Alloy aluminum reflector with professional optical analysis
1. Avoid diving lights/flashlights from heavy objects or heavy drops.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.
2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.
3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.
4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.
5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.