D950V
Model：D950V

OrcaTorch D950V is a 10500 lumen LED video light specially designed for underwater photography. It features a CREE chip-on-board (COB) high power LED. The spherical toughened glass optical lens design can create even illumination with 120°wide angle beam. The tail LED indicator instantly displays the battery's remaining charge.

• CREE COB LED, Max 10500 lumen output

• Spherical toughened glass optical lens design, 120° wide angle beam

• Color temperature 5700K, CRI, RA92

• Built-in replaceable large capacity battery pack

• Tail switch controls 4 brightness modes

• Tail LED indicator instantly displaying the battery’s remaining charge

• Safe lock function, prevents misoperation

• LED Charging indicator

• Intelligent Over-Heat protection

• Over-charge and discharge protection

• Water pressure resistant construction ,depth rated to 150 meters

• Aircraft-grade high strength aluminum material, etc.

• VIDEO: http://www.orcatorch.com/uploadfiles/images/55/55b5a4375f-videoplayback.mp4

D950V Underwater Video Light

OrcaTorch D950V is a 10500 lumens LED video light specially designed for underwater photo/videography, color temperature 5700K, CRI, RA92.

120° Wide Beam Angle

With spherical toughened lens glass, it has 120° more even illumination and thus help you get high quality photos and videos.

Built-in Replaceable Battery Pack

The rechargeable large battery pack gives you long time lighting and can be charged via the D950V tail port, which can also be taken out and used as a power bank.

Four Brightness Modes

You can adjust the 4 brightness modes via the tail switch, Low(I), Middle (II), High(III), and Turbo(IV).

Filter Adapter (Optional)

Used to attach filters to the D950V and to protect the lens glass of the D950V

Tough Design, Depth rated to 150 meters

Aircraft-grade high strength aluminum material and the latest diamond grade hard-anodized seawater-corrosion-resistance finish.

Size & Weight

255mm(Length) x 53mm(Diameter) x 72mm(Head), Net weight 1065g (including battery)

What's in the Box?

1. Avoid diving lights/flashlights from heavy objects or heavy drops.

2. It is recommended to confirm the full charge before each use, check if the O-ring is normal and apply oil to slow down the cracking.

3. After each dive, use water (use warm water to increase the salt melting speed) soak (recommended for 3 hours). Dry with a soft cloth, then carefully remove the battery.

4. Do not over-tighten the dive light/flashlight to avoid O-ring abrasion and deformation, resulting in increased water ingress.

5. Please keep it in a cool, dry place to avoid extreme heat, direct sunlight and chemical damage.