-
7601 First Stage
• Piston design
• One high pressure and three low pressure ports -
8515 SK100 Second Stage
• Second stage with a 27” black hose
• Balanced design
30-degree inline swivel
• Adjustable inhalation effort with knob
• Adjustable Pre-dive/Dive switch
• Weight (without hose): 189g
• Dimensions (front profile): 6.8 cm (approx.2.67”)
• Factory set inhalation effort: 1.1 CIW
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
