Features-
• Fail-Safe Design
• Light, Simple and Refined Style
Spec.-
• Maximum working pressure: YOKE – 3500psi. DIN – 4500 psi
• Chromium plate brass body
• Stainless steel springs
• 4LP ( Low pressure ) 3/8-24 Ports
• 1 HP ( High pressure ) 7/16-20 Port
• Wide range steady output 135 psi ~ 145 psi @3000 psi
• Weight: YOKE type – 552 grams. DIN type – 458 grams
• Fail-Safe Design
• Light, Simple and Refined Style
Spec.-
• Maximum working pressure: YOKE – 3500psi. DIN – 4500 psi
• Chromium plate brass body
• Stainless steel springs
• 4LP ( Low pressure ) 3/8-24 Ports
• 1 HP ( High pressure ) 7/16-20 Port
• Wide range steady output 135 psi ~ 145 psi @3000 psi
• Weight: YOKE type – 552 grams. DIN type – 458 grams
Features-
• Balanced Flow provides smooth airflow just like naturally breathing on the surface.
• Dive/pre-dive switch system for adjusting the direction of airflow right out of the valve.
Spec.-
• The core is made of metal chrome coating which made the product durable and corrosion-resistant stainless steel
• Pneumatically balanced valve
• The product body covered by ABS
• Minimum cracking effort 1.0 ~ 1.2 CIW
• Venturi switch for Dive / Pre-Dive adjustment
• Hose Length: 27”
• Weight: 213 grams
• Balanced Flow provides smooth airflow just like naturally breathing on the surface.
• Dive/pre-dive switch system for adjusting the direction of airflow right out of the valve.
Spec.-
• The core is made of metal chrome coating which made the product durable and corrosion-resistant stainless steel
• Pneumatically balanced valve
• The product body covered by ABS
• Minimum cracking effort 1.0 ~ 1.2 CIW
• Venturi switch for Dive / Pre-Dive adjustment
• Hose Length: 27”
• Weight: 213 grams
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
