-
We started with the EOS, a legendary regulator known for it's comfort and breathing profile and ended up with the ZEO. Like it's predecessor the EOS, the ZEO is also a phenomenal breather allowing the diver extensive control over the air flow profile at any depth. It takes this design one step further however by incorporating a tough and corrosion resistant chrome plated marine brass valve that has better cold water performance and even a better breathing experience. The all metal valve encourages the condensation of water vapor from your exhalation on the valve housing. When you inhale that condensed water vapor circulates with the airflow and helps to reduce "dry mouth" and increase the overall level of comfort. The ZEO also comes with our patented Dynamic Adjustment technology, diver inhalation effort adjustment controls, dive/pre-dive switch, swivel and an super comfortable orthodontic mouth piece.
The ZEO second stage comes paired with our new first stage FDX-i. The cold forged, over-balanced diaphragm FDX-i is environmentally sealed. It's in-line design limits the pressure loss inherent in "L" type first stage designs making the FDX-i more efficient and lighter due to it's compact form.
The ZEO/FDX-i combination is everything you need for a sublime breathing experience at any depth and in any environment. From the balmy tropical waters of the caribbean to the extremes of cold water diving's best dive sites, the ZEO will perform with reliability, consistency and comfort and makes taking your favorite regulator literally anywhere, that much easier. -
Alpha 10 Octo gives you the same effortless breathing, with its pneumatically balanced demand valve and simple, refined design. Breathe out a sigh of relief with this tough, recognizable and dependable performer. -
Modular flexibility. The MaxDepth gauge is still one of the most dependable instruments around for divers who are just starting out or don't feel they need the advanced features of a Personal Dive Computer just yet. But don't worry, Oceanic's modular gauge design allows you to easily swap out the depth gauge module with a PDC as your needs change and your experience grows. -
You glide through the water like a manta ray, air bladder tucked neatly behind you. Up front, there's nothing but contoured harness straps and a couple of integrated weight pockets. You're uncluttered, unencumbered and looking good. Built tough for use in both recreational and technical diving, the Excursion is extremely comfortable and stabile, the ultimate BC for the serious adventurer.
.jpg)
REGULATOR-
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
BCD-
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
CONSOLE-
Avoid placing it with magnetic objects to avoid affecting accuracy.
1. The first stage should be kept clean. Dust or sea salt may erode and cause air to be affected.
2. Every time you are diving, please avoid the regulator falling or being stressed by heavy objects. Otherwise, the first stage will be easily deformed and the second head will be broken and cause a malfunction.
3. Every time after the end of the dive, remember to use the remaining gas to spray dry and cover the protective cover to prevent the sea salt from accumulating on the air inlet and causing failure.
4. To clean the regulator, after completing the above steps, rinse or soak with water and dry in the shade.
5. Please keep it in a cool, dry place, avoid direct sunlight.
BCD-
1. The valves and wings should be kept clean. Sea salt can cause effects.
2. Rinse thoroughly with clean water every time after the end of the dive. Inject the clean water into the BC by about 1/3 of the volume through the mouth valve of the valve, fill the BC, then flip and shake the BC to thoroughly rinse the inside, then drain the water inside the BC through the mouthpiece. After repeating the above steps 2 to 3 times, finally fully inflate the BC, store it in a cool, dry place, and avoid direct sunlight.
CONSOLE-
Avoid placing it with magnetic objects to avoid affecting accuracy.
